The 2C0B is Tech Edge's miniature wideband product.
As well as Lambda/AFR it can also measure RPM,
two analog voltage channels and an additional Vss/Pulse input channel.
It has 3 Voltage outputs; WBlin (12 bit accuracy),
NBsim, and SVout (9.5 bit accuracy) which are all individually programmable.
It was introduced in December 2009, superseding the original 2C0.
2C0B now works with the newer and better LSU-4.9 sensor (our Bosch parts are the 17025 and 17123).
We designed it for small size and is therefore very suitable for motorcycle usage.
The 2C0 is housed in a tough, flame retardant, black ABS plastic case. It is small, 90 x 50 mm (ie. credit card sized) and just 25 mm high. The green connectors protrude an extra 10 mm outwards. Click on the images for larger pop-up versions. The unit has 5 connection points :
|
Buy the 2C0B Configured as Follows ...Note: The 2C0B needs a cable between the controller (2C0B) and the selected sensor - different sensors have different connectors (and therefore different cables). Cables are available in various lengths. 2C0B controllers come with power & RS232 cables and green connectors. A display is optional.
2C0B Technical ReferenceMuch of the technical information for the 2C0B is the same as the original 2C0 described here. The 2C0B has an additional 4 pin connctor immediately to the right of the 6 pin connector.
If you need to use the inputs on the 4 pin connector then please contact us for further technical information. For all other aspects of the 2C0B, including the wideband outputs, refer to the 2C0 information here. note: Original 2C0 (created 1 March 2004) page-count at 02 June 2010 (when this page was released) was 35,238. |